Contact

Installation guide
Operation, Maintenance Manual.
Power Range
10 kW - 15 kW - 20 kW - 25 kW
TM25 description
The TML wind turbines consist of a 12m rotor diameter and produce respectively 20 kW or 25 kW @ a wind speed of 12 m/s.

Click on the image for a larger view.

  • Blades are epoxy / glass fiber composite with a length of 5,5m
  • Low speed blade rotation generates low noise level
  • Direct drive, variable permanent magnets generator improving electric power output
  • Available in 50 Hz or 60 Hz
  • Electric yaw is gradually turning the rotor out of the wind
  • Anticyclonic tilting tower: 18 – 24m
  • On a site with an average annual wind speed of 6 m/s, the TM 25/12 will save over 70 Tons of greenhouses emission gasses
  • The TM 25/12 produces energy for distributed generation, village electrification and remote locations
    TML – Typhoon Master has released a remotely operated data logging to record and store information from operating the wind turbine.


ROTOR:
Type of Hub: fixed pitch
Rotor diameter: 12 m
Swept area: 113 m²
Number of blades: 2
Rotor speed @ rated wind speed: 108 rpm
Rated power @ 12 m/s: 20 kW – 25 kW
Cut in wind speed: 3, 5 m/s
Rated wind speed: 12 m/s
Cut off wind speed: 25 m/s
Survival wind speed, tower up: 50 m/s
Survival wind speed, tower down: 85 m/s
Power curve and energy output figures (see performance parameters)


BLADE:
Length: 5, 5 m
Material: Epoxy / Glass Fiber
Airfoil type: NACA thin series
Lightening protection
Blade weight: 45 Kg


GENERATORS :
Asynchronous 3 phase – 4 poles ( Grid connect )
Direct drive, variable speed Permanent Magnets (stand-alone, hybrid applications)
F requency: 50 Hz or 60 Hz
Speed (nominal): 1.500 (1.800) rpm @ 50 (60) Hz
108 rpm for PMG direct drive

TRANSMISSION:
Direct drive (permanent magnets generator)
Gearbox (asynchronous generator)
Ratio: 1/13, 89, planetary gears
Lubrication: synthetic gear oil / non toxic

YAW SYSTEM:
Electric drive rotates 360° and gradually positions the rotor out of the wind

TOWER:
Anti - cyclonic guyded tilting tower
6m tubular elements with flanges
Hoisting with gin pole by tractor or by electric winch

CONTROL SYSTEM:
PLC based
Instrumentation panel: wind speed, wind direction, current, voltage, frequency output power

APPROXIMATE DESIGN WEIGTHS:
Nacelle: 1.250 Kg
Tower: Upon request

ANNUAL ENERGY OUTPUT ( kWh )
( wind speed @ hub height 18 m )

WTG Model
Annual Energy Output ( kWh )
6 m/s
TMGC/SA10P
47.570
TMGC25A
61.000
TMSA25P
64.000

POWER CURVE (kW)
Upon request
Home page       About us       Services       Best Solutions       Contacts